Help! PLS.. I am using windows 7. the printer dsnt work in my laptop (sony vaio) but its working in my husbands laptop (Asus) same OS. When i click print it will show the SEND FAX box.I install the printer twice already I did the first one and then ...
I tried everything suggested online to get rid of this error message B200 and nothing is working. I can't believe this printer is useless already..what else can i do besides turning it off and on, cleaning the printer contacts..and praying something ...
first time I tried printing on 13x19 photopaper and it gets stuck on the way in. one side pulls the paper faster than the other. I tried cleaning the roller, checking for foreign objects, nothing. I am trying to feed one sheet at a time. any ide...
Is it possible to print irregularly sized pictures on the Pixma MG5220, i.e. sizes that are not manufacturer preset, like 4"x4", 8 1/2"x 11", etc? Thus far the only work around I have found is to copy and paste the image into PowerPoint, adjust the s...
Have Pixma iP 100 installed on Toshiba A665 laptop. Was working fine. Then upgraded to Windows-8 after which computer failed to recognize printer. Have down loaded Wx 8 driver from Canon website to no avail. Have uninstalled and re-installed still to...
I just bought a new canon multi purpose printer I have nearly installed but the message comes up as set the ink jets and can replace the cartledge . what does this mean and can I fix it?
I cannot get my printer to work wirelessly, it is a pixma mx410. Mp driver error message during installation.
Just brought home a new canon printer and am getting frustrated. It will not connect to our dell laptop.
I have a MG5330 printier. It is not printing blue. I have done all the maintenance. It may print one sheet and then the blue stops printing.
Hello , the ip4900 uses some defaults timeout settings for auto power base on a quarter of time (15, 30.... min). I was wondering if there is any way to change these setting in custome, like 2 or 5 minutes. thanks
Does anyone know if the Canon MG8120 has built in OCR? If so, how do I find out how to use it after scanning?
How do I set high resolution on my Canon Pixma 600 printer? Also the copies from my computer look ok, but when I copy them from the printer, I can hardly read the print. Any help out there? Thanks , Martha
Mg5320 lg black ink keeps blinking. Other colors print, I have tried cleaning, deep cleaning , 2 new lg black inks, purchased new print head and reset (whatever that does)......................what else is left? this is getting crazy expensive, im ...
I have just recently started having a problem with my MX870 Multifunction printer. When I send a fax, I get the status sheet back stating that the fax went through; however, the bottom half of the status printout that shows part of the fax informati...
Internet Explorer is not compatable with my Canon PIXMA MP Printer which browser is compatable with this printer? Thank you, Mary
| Subject | Author | Posted |
|---|---|---|
| 04-29-2024 07:28 PM | ||
| 04-28-2024 12:33 PM | ||
| 04-27-2024 04:40 PM | ||
| 04-25-2024 07:00 PM | ||
| 04-25-2024 03:03 PM |
New to the community? Here's some information to help you get acquainted:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
