09-27-2021 11:18 AM - edited 09-27-2021 11:18 AM
Hello
I purchased a new Canon PIXMA TR4520 a couple of months ago mainly for the scanner. I searched and compared and wanted a scanner that was capable of scanning at least 20 sheets at one time. I've had several Canon products over the years and felt this one was perfect.
Right from the beginning the pages do not scan properly. They pull to one side and if I don't guide each sheet it will crunch up and stop the whole scanning process. I then have to start over.
I've opened the cover and cleaned as much a I can so many times. I fan the paper all the time. I notice there is only one roller to the right to grab the sheets but there isn't one on the other side. The side without the roller is the side that won't go through smoothly.
Is this defective? Is there something else I should be doing?
Thanks for the help.
Solved! Go to Solution.
10-28-2021 03:04 PM
Hi GuardianAngel,
Please contact one of Canon's Technical Support Representatives via phone or chat. To contact a Technical Support Representative, please use the link below:
https://mycanon.usa.canon.com
10-28-2021 03:04 PM
Hi GuardianAngel,
Please contact one of Canon's Technical Support Representatives via phone or chat. To contact a Technical Support Representative, please use the link below:
https://mycanon.usa.canon.com
10-28-2021 07:47 PM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.