cancel
Showing results for 
Search instead for 
Did you mean: 

PIXMA MG5320 Printer Error B200

stargate69
Apprentice

I have an old Pixma MG5320 that gets rarely used. Now it tells me to unplug and call service center. I tried the reboot action with the same result. SOOO, do I get a new similar printer OR, cheaper to get it fixed ???     Printer Error B200 Thanx fer your responses .... B C ....

1 ACCEPTED SOLUTION

Patrick
Product Expert
Product Expert

Hi stargate69,

 

The B200 error is an indication that your PIXMA MG5320 would require service.  You are eligible for Canon's Upgrade Program. This is for out of warranty units which have been diagnosed to require service, or for some reason are incompatible with a new or upgraded system. This option allows you a one-time opportunity to purchase a replacement product, discounted from the list price.

To help you get up and running quickly, we also offer free standard shipping (if the order is completed by 12:30PM ET). If you would like to take part in this option, please call our Sales Department at (866) 443-8002.  They're available weekdays and Saturdays after 9 AM ET (6 AM PT). Let them know you have been working with technical support and the Canon Upgrade Program was offered.

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

11 REPLIES 11

Patrick
Product Expert
Product Expert

Hi stargate69,

 

The B200 error is an indication that your PIXMA MG5320 would require service.  You are eligible for Canon's Upgrade Program. This is for out of warranty units which have been diagnosed to require service, or for some reason are incompatible with a new or upgraded system. This option allows you a one-time opportunity to purchase a replacement product, discounted from the list price.

To help you get up and running quickly, we also offer free standard shipping (if the order is completed by 12:30PM ET). If you would like to take part in this option, please call our Sales Department at (866) 443-8002.  They're available weekdays and Saturdays after 9 AM ET (6 AM PT). Let them know you have been working with technical support and the Canon Upgrade Program was offered.

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My MX892 error B200

Any idea what ti fix this?

Any idea how to fix error B200 on a MX892 printer? Thanks

Try turning printer off, disconnect from electric. Press OK button on printer 5 times, reconnect electric, turn on printer. It worked for me. B200 error code gone.

LHTLNDRS
Apprentice
Hello,
B200 was my problem as wel on Pixma Pro 10 S.
I tried all the mentioned solutions (pulling out power etc .....).
no results ...
Then I performed a deep cleaning ( getting it out of the printer and bathing in a solution of demineralized water and ethanol) .
After a few hours cleanded and dryed the printhead carefully, replaced it and waited for one more day. Then while the power was unplugged pushed the power button constantly during 30 seconds, pushed the powercable in and held the power button one more 30 seconds. Released the power button. Power was of. The again pushed the power button and the printer started again. After a while of 'printeractivity' I printed a test page and everything was OK ........fot the time being .... if, again I have the same problem I come back to this forum ..... succes!!!!

willjoe
Contributor
How to Fix the Canon B200 Error
  1. Reset the printer.
  2. Remove any obstructions.
  3. Clean the printer head.
  4. Manually clean the print head. 
  5. Remove old ink.
  6. Re-install the printer drivers. 
  7. Try a new ink cartridge. 
  8. If none of the above methods work, the B200 error is probably accurate.

 

Regards,

Willjoe

haxita786
Apprentice

 

How to Fix the Canon B200 Error

There are various options for repairing a defective print head and resolving the B200 problem. Before you replace the complete device, try some of the options below.

1- Reset the printer's settings. Disconnect it for at least 30 minutes after unplugging it. Before turning the device back on, a good, long reset helps the printer to cool down and return everything to its proper position.

2- Remove any impediments. It's possible that something is interfering with the printer head's connection. Remove the print head from the printer by opening the door and carefully disconnecting it from the device. Reinstall it and see if it solves the problem.

3- Remove the printer head and clean it. Run the device's cleaning cycle using the device's maintenance options. If the printer head becomes clogged, this feature comes in handy.Go to printerflash for more information.

cooltouch
Contributor

My Pixma ix6820 threw this code a few hours ago. First thing I did was clean the heads. Fortunately, it is a snap removing the head tray from this printer. I had watched a bunch of YouTube videos on how to clean the heads on Canons, so I kinda knew what to expect. At any rate, I feel confident that I cleaned the heads properly. I might should have waited a little longer than I did before reinstalling them, but I made sure at least that the head tray's exterior was completely dry. Anyway, reinstalled it, and I'm still looking at the blinking lights -- 10x blinks means B200. So, I pull the head tray again to make sure there wasn't a misalignment or anything. Really, installation is dead simple and I don't see how anybody could get it wrong. So I reinstalled the head tray the only way it looks like it will fit. Again, the 10x blinks.  Sigh.  

So I'm gonna tray haxita786's advice -- well, not in the exact order, but when it comes to letting the printer rest for a while unplugged, this I haven't done yet. So it is now unplugged. Keeping my fingers crossed, and knocking on wood. I'll check back in if it works.

 

Best,
Michael
Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x