cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PIXMA MG2522 Alarm Light Blinks 22 Times

Dsturg05
Apprentice

The green power light is alternate blinking with the alarm light. The alarm light will blink 22 times before a brief pause then the cycle continues. I just took the printer out of the box but have had it for over a year. Any ideas how to fix ?

3 REPLIES 3

StevenMOD
Moderator
Moderator

Hello and thank you for your post on the Canon Community! We suggest checking out this knowledge base article to help narrow down which error code you're experiencing. You can find it now here.

Did not help as I’m getting 22 blinks / a 5011 support code . That article says nothing about that

Hi Dsturg05,

The 22 flash error may be resolved by resetting your PIXMA MG2522. Please follow these steps:

1. With the printer powered on, open the cover. The ink will move to the replacement position.

2. Remove the black ink cartridge.

3. Remove the color ink cartridge.

4. Once both cartridges are removed, with the PIXMA MG2522 on, please unplug the power cord from the back of the unit.

5. Wait 5 minutes and then reconnect the power cord.

6. Turn your PIXMA MG2522 on.

7. Open the cover. The carriage that holds the ink will move to the replacement position.

8. Make sure the orange tape is off of the bottom of the black cartridge.

11. Reinsert the black ink cartridge into your PIXMA MG2522.

12. Make sure the orange tape is off of the bottom of the color cartridge.

15. Reinsert the color ink cartridge into your PIXMA MG2522.

Close the cover. The PIXMA MG2522 should make some noise for a few moments, and then return to standby.

If the error flashes persist, your PIXMA MG2522 would require service.

You are eligible for Canon's Upgrade Program. This is for out of warranty units which have been diagnosed to require service, or for some reason are incompatible with a new or upgraded system. This option allows you a one-time opportunity to purchase a replacement product, discounted from the list price.

If you would like to take part in this option, please call our Sales Department at (866) 443-8002 Monday through Saturday, 9am to 9pm. Let them know you have been working with technical support and the Canon Upgrade Program was offered.


 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.