02-23-2024 05:15 PM
Our MX922 started printing "normal", standard printouts poorly, fuzzy, or characters doubled. The funny thing is if the printer is set to "high resolution paper" (even if paper is just normal paper) and "high quality", the printer prints *very* slowly, but very clearly. The printer is obviously physically capable of creating crisp output but it will only do so in the situation above. This isn't acceptable because the "high quality" printing is very slow, and it does not allow 2-sided printing. Is this something that can be fixed with a driver or firmware update, or is this a hardware problem? Suggestions welcome, thank you!
03-12-2024 12:47 PM
Hi,
To begin troubleshooting, I would clean the encoder strip in the printer by using the steps HERE.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
03-18-2024 03:06 PM
Thank you for the suggestion, I had cleaned the encoder strip a couple of times, and all other cleaning/maintenance suggestions. In the end I just gave up and bought a TR8620a, which is performing quite well so far.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.