08-14-2023 09:15 AM
I want to print on standard pre-printed bank checks but the MG2522 adjustable paper guide does not move far enough to the right to properly guide the checks (2.75 inch wide). Because of the gap, the checks turn slightly while feeding. Is there a workaround? Can I safely insert a spacer next to the paper guide to close the gap? Does Canon make a spacer? Please advise.
Solved! Go to Solution.
08-16-2023 01:50 PM
Hi,
Bank checks are not a supported media type with this model printer. Canon does not make a spacer that would fit next to the paper guides.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
08-16-2023 01:50 PM
Hi,
Bank checks are not a supported media type with this model printer. Canon does not make a spacer that would fit next to the paper guides.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
08-22-2023 02:19 PM
Thanks ArthurJ for responding. Hopefully, future Canon printers will accommodate the ability to print on bank checks.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.