07-07-2023 01:36 PM - last edited on 07-07-2023 01:41 PM by Danny
Hello, I recently purchased a phantom power audio mixer for my canon EOS 80D w/ hopes of hooking an xlr mic for either lavs or a boom so i dont have to sync audio in post. I plugged the Saramonic into the mic port of the camera, but am getting absolutely no sound whatsoever. Tested the mic in another camera and it works fine, and the sound mixer seems to be working accordingly, so im not sure what to do at this point. I was hoping to shoot w/ it tomorrow. any ideas?
07-07-2023 01:53 PM
What specific microphone are you plugging in to the 80D? The 80D wouldn't be supplying any phantom power, so pretty sure the mic would need to be self-powered. Also, what are the audio settings you set up on the camera? Perhaps you have it set to use Line input instead of Mic input?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.