Community Activity
Canon IJ Scan Utility Problem
Most of the time my "Canon IJ Scan Utility" works fine. However, occasionally I get this: I am getting this because the software thinks I have a 2nd Canon printer, which I don't. The printer is NOT in my list of devices so I can't solve the problem...
Cannot submit repair request - EOS R6 Mark II
Has anyone had trouble completing a repair request? I've filled out the form in its entirely. But at the end "submit request" is grayed out. I can only cancel the request. I've tried on both Chrome and Safari incase it was my browser.
Canon LiDE 400 - Can Not Scan at 4800dpi
Hi there, I recently bought the Canon LiDE 400 scanner as the resolution goes up to 4800. I need the maximum resolution as I want to blow up some antique hand painted artworks which are tiny. I have tried downloading the IJ scan utility software and ...
C Log3 Pros and Cons - EOS R8
hello everyone - Im a newbie with my Canon R8. Can you point me to a discussion about C Log3. Why shoot in C Log3? So far, I I don't see any value in this setting. The image is dark, grayish and muddy. Then to fix that, the Canon LUT is required whi...
National Parks Week - Show Us What You've Got!
Have you ever taken an awesome photo at your favorite national park that you just had to show off to everyone you know? You're in luck! It's #NationalParkWeek and we want to see them! Share with us below. Joshua Tree National Park - California I ha...
EOS 1D Mark II Video Shows as 0 Bytes
Hi I am looking for some help. I have a 1D X Mark II. I have been running into this issue where I can see and watch the video on the camera, but when I plug the camera into the computer to try to extract the video I can see it but it has 0 bytes. Oth...
Question on suitability of EF 70-200MM F/2.8L IS II USM for "travel" photography.
Hello. I am looking to add an additional lens to my travel kit. My basic camera is a Canon 80D fitted with an EF-S 17-55mm f2.8. Also have a 70-300mm which give so-so results. Also a kit lens, and wide angle. Question: Is a 70-200mm Lens f2.8 or f4.0...
Refurbished R3 Body For $3499 - Canon Store
Greetings,That's right. You can grab an R3 for $3499. The promotion is running for 5 days or while supplies last. They won't last long.
Resolved! EOS Rebel SL3 says SD card is locked but it's not
Hey folks,Beginner having trouble formatting their SD card. I've made sure that I'm inserting my memory card correctly and that it's in the "unlocked" position, but even so, when I go to the menu to format it, the camera says it's locked. Any idea wh...
Extender EF 1.4x III won't fit on EF-S 18-55 or EF 75-300
I have a model EOS Rebel T3 camera kit with 18 - 55 EFS and 75 - 300 EF lenses. I purchased a Canon EF 1.4 X III lens extender. It fits on my camera body but does not physically fit up to either EF or EFS lenses listed above. I figured since it is...
RF 200-800 Lens Design Issue - Filter can't be used with hood
A friend of mine was lucky enough to have received her Canon RF 200-800mm lens that she had ordered in Nov. 2023. She has encountered an issue with the lens design. The new lens does not appear to allow use of a filter while the lens hood is in pl...
imageCLASS D1550 always tries to do 2 side printing
Hello, I am having trouble with a Canon Image Class D1550 from 2016 where it always tries to print documents from 2 sides.I have deleted and reinstalled the drivers of the printer, I have made sure that the setting on the drivers, the printer, and t...
Happy with EOS R6 ISO Performance
Just got an R6 as my first FF camera and am amazed at the ISO performance. I’ve been using an R7 for wildlife photography for some time and anytime the ISO crept upwards of ~3000 the noise would start to degrade the IQ a bit, at 6400 photos were typi...
Trying to change the cassette pickup roller on MF8580CDW
Trying to change the cassette pickup roller on MF8580CDW.but the pickup roller never rotates.Did the following:Menu 28 MenuCopier > Function > Viffnc > FD-R-Chg > OK says executing but the pick roller never rotates. Any suggestions?
PIXMA TR8620a software asking for admin login
I cannot download the Canon software for my new printer. Keep getting message that says I must be logged in as Admin, and I am the Admin. This is very frustrating and I'm about ready to send back the printer.
