Connect with #TeamCanon experts, fans, and community members to ask questions, share knowledge, and connect with others.
Have been very happy with this printer, but suddenly having problems I can't fix - faint printing and missing parts (mid-section) of lines. Have done nozzle test, cleaned roller, changed low ink cartridge. What now???
Some context it’s currently 72° outside and sunny. I am shooting in a raw and have been operating the camera for less than 30 minutes. I have taken less than 30 photos and the back panel under the screen isn’t even warm to the touch. Is this normal b...
I have an rf 35mm 1.8 Macro lens that isn't focusing on anything past fifty feet. I've tried in both manual and auto focusing modes. The focusing square will remain red in auto mode, and the entirety of the screen is blurry when using manual. It'll l...
I have used my G7020 to successfully scan items from the flatbed ever since I got the printer months ago. The scanner is connected to my PC via my local network, which the printer shows as working OK. Now, when I try to scan using an application (inc...
I have a TR4720 printer and have two problems.1. It is printing very light.2. When I want to print a file, usually wood carving pattern at actual size. The size is smaller than a page. I cannot accomplish anything other than the selection provided. T...
All that has been done is to drastically downsize the images for posting, in part by using a 1:1 format on both. These were taken within seconds of each other, of the same bird (a Takahe), in available light, hand-held.To me there is very little dif...
Hello,I just upgraded my M2 Macbook Air to the new M3 a few weeks ago. Long story short, I reinstalled my Canon Pixma TS-3522 (including the software and drivers) to my device, Everything went well until I decided to print my first page. I would k...
I have an MX722, error code 1403 just came up. is there anything I can do to clear it??
Hi - when turning on my R8 the screen has gone blank
Hello,we are getting soft banding on dark grey areas (Please see attached image).I already did:1. Firmware update;2. Disassembled cover panels and checked for air bubbles;3. Replaced print heads;4. Increased Ink Dry time up to 3-9 sec;5. Drilled hole...
Hi there, I want to add the film simulations via EOS Utility. But when I connected the USB 3.0 to my laptop, EOS Utility app won't open itself neither can be connected even if I manually open the Utility app. The camera is on, and in a photography mo...
My setup: Rebel T7 and Macbook Pro 2021 with M1 Pro on MacOS Sonoma (14.3.1)The problem: For the last few years, the connection when using my T7 as a webcam has been very unreliable. I would have to power cycle, kill app and restart, plug/unplug, ...
I am working on a MAC OS Sonoma 14.2.1 and I have downloaded the iMage Runner 3525i print driver and I am unable to find any buttons or menus in my print menu that allows me to select or deselect second side printing. Is this a print driver issue, or...
I just got an R6 Mark II and am having trouble with FEL not working.I frequently use fill flash when photographing subjects outdoors in direct sunlight in order minimize facial shadows and ensure the subject and background are properly exposed. I sh...
Hi,I am going to be getting a new r8, I currently have a 70d with a Tamron 18-400. The photos I take are animals, landscapes and nature.I am thinking that I want an rf lens, but I do not know what would work the best. I probable want weather sealed...
New to the community? Here's some information to help you get acquainted:
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Subject | Author |
---|---|
Anonymous
| |
User | Likes Count |
---|---|
35 | |
26 | |
26 | |
20 | |
18 |
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.