cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Who Me Too'd this solution

Michael
Product Expert
Product Expert

Hello.

 

Please try the following to see if we can resolve your issue:

 

1.  Turn the printer off.

2.  Unplug the power from the printer for at least 5-10 minutes.

3.  While unplugged, remove any paper from the unit.

4.  Double check for any obstructions found in the unit or paper paths.

5.  If no obstructions are found, plug the power back in and turn the unit on.

 

If the issue persists, troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.

This didn't answer your question or issue? Find more help at Contact Us.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

Who Me Too'd this solution