Welcome to our Community!

Connect with #TeamCanon experts, fans, and community members to ask questions, share knowledge, and connect with others.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
210141members
346485posts

Community Activity

Resolved! PIXMA iP7220 Faded Colors when printing direct on CD

I just purchased a Canon PIXMA iP7220 for the purpose of printing CD labels Direct To Disc. When printing on disc, the colors are very faded.  Black prints as a very light gray.  Almost unreadable. When printing on paper, the colors (including black)...

jfkjax by Apprentice
  • 2011 Views
  • 3 replies
  • 0 likes

G3260 Cannon voltage 100 - 220 volt question

Hello and thank you in advance for your replies. I am taking my G3260 with me to Europe. The tag on the bottom says 100 - 220 volts. I can't find any voltage conversion switch on the printer? Does it automatically switch over when I plug it into a 22...

MotoGP Red Bull Grand Prix of the Americas

Worked the MotoGP Grand Prix this past weekend at the Circuit of the Americas track in Austin.  A lot of fun but a lot of walking also.R5 with an RF100-500, F5.6 to 7.1, SS varied from 1/60 to 1/125 for the bikes and 1/500 for the crowd shots, genera...

Bike-3.jpg Bike-9.jpg Bike-2.jpg Bike-91.jpg
JPS_ by Enthusiast
  • 36 Views
  • 2 replies
  • 1 likes

Vivitr for Canon 75-300 lens on Canon EOS Rebel T100

Hello, all. My son-in-law has a Canon EOS Rebel T100 camera.  I bought him a Vivitr for Canon wide angle + macro lens for Canon EF 75-300 f/4-5.6 III lens.  I have no photography experience, but based on the research I did, I thought this would fit h...

acr2024 by Apprentice
  • 66 Views
  • 2 replies
  • 0 likes

I’m considering getting rf 100mm f2.8L macro but..

For crop sensor,r10 this lens seems bit too long for portraits , not long for sport or wildlife . I’m mainly interested in its 1.4 macro but that money would need to be utilised more than just for that . I already have 35 mm 1.8 but 0.5 macro, and 10...

imageCLASS MF267dw won't scan from ADF, OK from platen

I can't get my new MF 267 printer to use the feeder. Using the computer printer utility, I receive the message "Place the originals in the feeder" even though they are in the feeder (and I hear a beep when loaded). Using the printer, I receive the me...

emprof by Contributor
  • 2735 Views
  • 4 replies
  • 0 likes

Resolved! Canon RF 70-200 2.8 inner elements shaking

Just got my new 70-200 2.8 RF today and this is what happening. Shake baby, shake.Things I tried:- IS off, wait sometime, turn off the camera;- replace the battery (used 7.2V canon original);- replace the camera (R5 and RP);- firmware update;This hap...

C37_ by Apprentice
  • 1805 Views
  • 8 replies
  • 0 likes

Speedlite 430EX compatibility with Pocket Wizard FlexTT5

Im sure this has been covered here before but im looking for very basic instructions for a real non techie girl.i try to shoot with natural light or simple studio light setup. however today I'm playing around with my flash, studio strobe and pocket w...

littleny by Apprentice
  • 3605 Views
  • 7 replies
  • 0 likes

Congratulations p4pictures, You Ranked Up!

@p4pictures  Thank you for your continued contributions to the Canon Community & congratulations on ranking up to a Mentor! This is quite an accomplishment with only 6 other community members earning this rank. Community members, learn more about ra...

rank_featured_postv2.png
ccanada by Community Manager
  • 96 Views
  • 3 replies
  • 9 likes
Featured Photo
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
Popular Authors