Community Activity
Refurbished R3 Body For $3499 - Canon Store
Greetings,That's right. You can grab an R3 for $3499. The promotion is running for 5 days or while supplies last. They won't last long.
Extender EF 1.4x III won't fit on EF-S 18-55 or EF 75-300
I have a model EOS Rebel T3 camera kit with 18 - 55 EFS and 75 - 300 EF lenses. I purchased a Canon EF 1.4 X III lens extender. It fits on my camera body but does not physically fit up to either EF or EFS lenses listed above. I figured since it is...
I made a BP-A30 battery grip for the Canon R5 C R5C
I made a battery grip for the R5C using the canon BP-A 30 batteries. Now I have 8k 60p no limitations, and battery anxiety is also nonexistent now . Also getting about 2 1/2 hours of use. Thought I would share this because if I can make this you can ...
EOS R6 Mark II shutter button triggers odd sound with EF lenses, RF OK
Hi! First timer here! I have an R6M2 and I use both RF and EF lenses. I have the ring adapter. Some of my photography requires that I use the silent shutter. I haven't had any issues with the EF lenses until this past weekend. It makes an odd sou...
Cartridge stuck in MG3600
Need to change my black cartridge but need to remove the colour to get to it the colour will not move out completely
RF 10-20mm F/4 L IS STM availability
Has anyone heard anything about when they are going to ship out another batch of rf 10-20mm lens. This is getting ridiculous.
Canon LiDE 400 - Can Not Scan at 4800dpi
Hi there, I recently bought the Canon LiDE 400 scanner as the resolution goes up to 4800. I need the maximum resolution as I want to blow up some antique hand painted artworks which are tiny. I have tried downloading the IJ scan utility software and ...
Happy with EOS R6 ISO Performance
Just got an R6 as my first FF camera and am amazed at the ISO performance. I’ve been using an R7 for wildlife photography for some time and anytime the ISO crept upwards of ~3000 the noise would start to degrade the IQ a bit, at 6400 photos were typi...
PowerShot SX120 IS randomly turning off, lens won't always retract
My great Canon PowerShot sx120 acting weird:(Hi I have an older Canon Powershot sx120.i am original owner..It has been such a great camera for a long time ,,without any issues. I've done photography for a long time and I'm familiar with all kinds of ...
Question on suitability of EF 70-200MM F/2.8L IS II USM for "travel" photography.
Hello. I am looking to add an additional lens to my travel kit. My basic camera is a Canon 80D fitted with an EF-S 17-55mm f2.8. Also have a 70-300mm which give so-so results. Also a kit lens, and wide angle. Question: Is a 70-200mm Lens f2.8 or f4.0...
DPP - unable to save edited photos - error message "error 1" is generated
Hello!I'm running DPP 4.18.1.0. I'm using macOS Sonoma 14.4.1.I've been trying to edit photos from a recently purchased Canon EOS R5. The files are "raw" with filename extension ".CR3".I'm unable to save any photograph I edit using DPP. The error mes...
imageRUNNER Advance C256i Cannot access anything after trying to setup Wireless LAN
Hello, we have an imageRUNNER Advance C256i in our office, we weren't able to succesfully connect the printer to a wired router, so we were trying to setup a wireless LAN connection and given we weren't very familiar with the options we kinda soft lo...
imagePRESS C10010VP print quality questions
Hello. I am looking at digital book press printers. Such as PRESS C10010VP. They are quite expensive. But I see they are inkjet. I was shocked when I discovered this. Isn't inkjet print fuzzy and low quality? Doesn't the print also completely disinte...
imageCLASS X LBP1238 II & LBP1127C won't wake up from sleep state
I work in a school district that has all canon printers. There are only two school buildings and maybe a total of 89 printers in total. The printer models vary but are primarily LBP1238 and LBP1127C. In one of the locations, there are issues when use...
imageRUNNER 2535 Error Code: NG(#0853)
Since about 4 days ago a CPU that had no issue with printing is now producing NG(#0853) in the print log Windows 10 (build 19401) should be the most current versionNetwork printing to an iR 2535 Standard TCP/IP port 9100Have tried both UFR II drivers...
