Canon Community

slocumjoseph · ‎06-04-2021

I had been using a Canon 430 EX as a slave but it’s been stolen. Is it possible to trigger a Canon 580 EX if I use it as a slave and have a Canon compatible Sunpak 4000AF in the hotshot on a ...

BrianAE1 · ‎01-22-2021

I used to use my 580exII on my 5DmkII for events and the flash would send out a red focus assist beam. It helped immensely when working events at night. It doesn't seem to do that when I use...

wildwoodphoto · ‎03-10-2021

I have an ST-E3-RT with two Speedlite 430 EX III-RT's. This works great from behind the camera to control the power output of each speedlite. However, there are ocasions when I need to chang...

wildwoodphoto · ‎02-22-2021

I have an EOS 5D MkIV and 2 x 430EX III-RT Speedlites. I will also be adding a Godox AD600Pro for extra power when needed. What trigger/receiver do I need to fire ALL THREE lights toget...

wildwoodphoto · ‎02-08-2021

Need recomendation for a wirelsss Speedlite product for real estate photography. I'll want to have the ability to put the speedlite in another room and stiill have it trigger.

sirikwamutu · ‎01-06-2021

I have a Canon EOS 5D MkIII, which, has no built-in flash like both my EOS700D & 650D DSLRs. I have two Canon 430EX-II Speedlites which I was able to fire off wirelessly with the 700D. Not tried ...

peteck18 · ‎11-14-2020

I have a Canon 430ex speedlite and a Canon EOS 90D. Try as I might I can't get the wireless flash to work. The speedlite is set in slave mode The camera settings are set correctly as ...

vgajnky · ‎11-04-2020

I'm using a EOS 77D (love it BTW). I'm using the camera as a remote trigger for a 580EX II Speedlite . I'm trying figure out how to get the Speedlite to fire Everytime I press the shutter vs when I p...

Aaplmike · ‎04-10-2020

Hello, all. I bought an MT-24EX for use on my 7D. When attached, only "TTL" and "M" show as modes on the flash. Also, in the menu on the 7D I can't access the External Flash settings. The ca...

hscody · ‎02-26-2020

I just purchased a Youngnuo YN622C-Tx flash trigger and YN622CII receivers. I'm trying them on my Canon 430ex speedlight. They work perfectly in ETTL mode, but in Manual mode, I cannot ad...

Canon Community

Master & Slave

580exII on a 5DSR

Speedlite Transmitter ST-E3-RT

Remote Triggers/Transmitters

Speedlite Recomendation

How to Wirelessly Fire a Canon 430EX-II Speedlite ...

can't get the wireless flash to work

580EX II - Manual Firing Setup (How to??)

MT-24EX not showing ETTL option on 7D

430 ex using Youngnuo 622 flash trigger