01-12-2016 11:03 PM
Please let me know how to connect my computer to my printer wirelessly, through my Airport router. Thanks.
01-18-2016 01:57 PM
Hello,
I just set my new printer up after lots of frustration. The instructions are very poor; written by someone who cannot put him/herself into the position of a person doing the setup.
1. Go to the Canon site and download the two files for your printer and MAC. One is the driver and the other is the setup instructions.
2. Install driver (run the downloaded program).
3. Run the setup program and select EASY setup and NO WBS BUTTON (I think it's WBS) because you have a MAC router.
4. You need to temporarily connect the USB cable between the printer and the MAC (this is NOT CLEAR in the instructions)
5. Follow the instructions and when you are finished go to SETTINGS on the MAC and select the CANON printer.
I'm sure you'll have questions and I'll help if I can. Be patient and don't hit anything or anybody.
Richard
02-01-2016 03:32 PM
Thank you for the instruction. It was very helpful - and what Canon provided was not.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.