02-17-2021 11:52 PM
I have a new Pixma TR7520 printer. A wireless printer is new for me. Anyway, when setting up I made a mistake in "Preparing for Connection." I pressed Stop as if i wanted to "use only printer." And then, "Do Not Connect." How do I undo such a basic choice??
02-18-2021 10:51 AM
Greetings,
I don't believe I've ever seen the messages you reference above. Maybe this is a difference in terminology?
Is this on PC or MAC? (Which OS)
Is this a dialog that appeared when you were running the software installation?
Did the device install or not?
Are you having a problem printing?
If yes, I would suggest reinstalling the software.
If not, you are probably ok.
~Rick
Bay Area - CA
~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
02-18-2021 04:07 PM
Hello shadowsports,
Thank you for your prompt reply! As you suspected it would, my problem has ironed out, especially with me using the online manual closely (ah-HAH). For the record I have a Windows 10 machine.
b-b
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.