05-11-2016 12:28 AM
This is a new install...Recently purchased PIXMA MX922 and have not been successful in getting to recognize my router. Steps I took:
1. Menu --> Search for Access Point --> once engaged it times out.
2. My second attempt involved...Menu --> Change set up method --> Other setup ---> Advanced setup --> My access point is not displayed in the menu. I searched several times to no avail.
3. Last Attempt: My third attempt was to enter the name directly. The result was the same - access point was not found.
Any ideas on what I might be doing wrong?
05-11-2016 09:24 AM
@Deleted021121a wrote:This is a new install...Recently purchased PIXMA MX922 and have not been successful in getting to recognize my router. Steps I took:
1. Menu --> Search for Access Point --> once engaged it times out.
2. My second attempt involved...Menu --> Change set up method --> Other setup ---> Advanced setup --> My access point is not displayed in the menu. I searched several times to no avail.
3. Last Attempt: My third attempt was to enter the name directly. The result was the same - access point was not found.
Any ideas on what I might be doing wrong?
I have no idea what it might be doing wrong..
Check your security settings in your wireless router. Make sure that it is not setup to only allow connections to a list of valid MAC addresses. If so, disable it until you get connected, and can add the printer's MAC address to the list.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.