01-30-2019 05:22 PM
02-01-2019 04:04 PM
Hi Lestat,
There are a couple ways to get the printer connected to a different network. One way would be to use the WPS (wireless protected setup) on the router. Please click here for instructions.
Another way is to connect using the Cableless setup and a smart phone. For instructions with an IOS please click here and for instructions for an Android please click here.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.