03-27-2021 06:45 PM
MG3620 printer will not connect to wifi.
Connection: Inactive
Signal Strength: 0
Any help appreciated.
03-28-2021 08:00 AM
Greetings,
The 3620 requires a 2.4Ghz broadcast for wireless connection. If your router is dual or triband and you are using SMART Connect or similar (One SSID for all broadcasts) the printer might have difficulty connecting.
What often helps is temporarily turning this off while performing set up.
Things to confirm:
Router
2.4 Ghz wireless is broadcasting
Can you connect another device succesfully
Verify passphrase of your wireless network
Use WPA2-PSK for security
I would suggest performing the set up steps again, wireless help:
Support | MG Series - Inkjet | PIXMA MG3620 | Canon USA
~Rick
Bay Area - CA
~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.