cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pixma MG5420 won't connect to wifi network after changing routers

gordomitchel
Contributor

Hi-

I'm now frustrated by the inabliity of my Pixma MG5420 to connect to my wifi imac network.  Previously I used a Apple Airport router, but decided to change to my cable provider's router (Spectrum).  Previously my network was not encrypted, but the Spectrum network is encrypted by default to WPS2-PSK(AES).  When I tried to connect the printer to the network it would not connect at first.  Then I tried using the advanced option to connect to the access point.  It had an option to use encryption and I chose the identical encryption option WPS2-PSK(AES).  The printer then connected to the network.  However when I go to view the printer in my Mac favorites under printers, it does not appear.  How can the printer be connected to the network yet not be visible to my computer?  I need to better understand how the printer is connected, and if there are any software tools to diagnose what the problem is.  Thank you.

19 REPLIES 19

my printer was new in 2013. the "3Z4BZKF" page is about a TR4720 printer from 2022. makes a difference, right? the menus are quite different. even assuming the "written instructions" are for mac, my corresponding choices are, from "device settings" to "LAN settings" then to a choice of "WLAN active/inactive"/"wireless LAN setup"/confirm LAN settings"/"other settings"/"reset LAN settings". i've perused all the relevant options and i don't see anywhere to put in the passphrase. i know i did it once before a few years ago, but only with the very reluctant help of someone at CANON. i'm making a simple change, right? i watched the mac video in the "3Z4BZKF" page, also for the TR4720 and it also uses choices like "easy WL connect" that my printer doesn't give me. please help, again, bill / wmharv

You're right - that was 100% my fault - I had an extra tab open and referenced the wrong printer. 
You'll find support for your printer here: https://canon.us/41GvcIO
Scroll down and there's a section called Setup & Troubleshooting, then "Re-establishing Printer Connection After A Network Change." Follow that.
This page is the reference for the MG5420 to enter numbers and symbols: https://canon.us/3Y6h7RT 

As a reminder, shortcuts to all of your software, manuals, and how-to documentation can be easily found within your My Canon Account at https://canon.us/account 

41GvcIO is for pixma mg7520. anyway, i found the "re-establishing printer ... after a network change" document. at the end of a section Notes on Network Connection is the statement "place the computer and machine on the same network segment." isn't placing "the machine", the mg5420, on the same network segment the problem? the printer "sees" the router, but can't connect to it without my telling it the passphrase.

Sorry for not responding for a long time.  I did delete and reinstall the printer driver and now the printer is working fine.  Thank you all for responding

Hello I have the same issue as the above poster.

My PIXMA MG5420 will not connect to my wifi. The wps button method does not work. When I go to setup I click on my internet name but it does not provide an option to enter a passcode, it just tries to connect unsuccessfully. There is not option for me to enter a passcode as illustrated in the posted links. Any help is appreciated 

Thanks for joining the conversation, Lelani30!  The PIXMA MG5420 is an older model which we have retired. While that means that Canon USA no longer offers direct support for it, your friends here in the Canon Community are welcome to offer suggestions!

You can also speak with a Canon Upgrade Program specialist to help you score a modern replacement that would meet your current needs at a discount. You can reach them weekdays and Saturdays at 1-866-443-8002.

Hope this helps!

fisherd
Apprentice

Not for the MG 5420, however my 8322is not connecting to a new router. The online manual has not been useful. I am not getting any response from the https:// ij.start.com site or canon support. Since my move to a new house, I thought it would automatically connect. How do I solve the problem? Thanks to anyone who can offer advice.

Hi fisherd,

 

When changing routers, the PIXMA TS8322 must be connected to that new network.

 

To do this, please follow these steps:

 

1.  Tap the Wi-Fi icon in the lower left corner

 

2.  Tap Wi-Fi

 

3.  Tap the Settings button

 

4.  Tap Wi-Fi setup

 

5.  Tap Manual connect

 

6.  Select your wireless network from the list

 

7.  Please enter your Wi-Fi password

 

8.  Tap OK once entered

 

To view this process, please use the following link:

 

https://support.usa.canon.com/kb/index?page=content&id=ART175342

 

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My Wifi doesn't show up in the list when trying to connect manually, but it does detect the access point.  Mine times out when I'm pressing the WPS button on my modem and after I hit okay on the printer.  Any help would be appreciated.  I also think the install of a second router interrupted my seemless process prior to this. 😞

it's not ij.start.com - try this link: canon.us/ijstart

That should re-install the printer software for you. If it doesn't, try this: https://canon.us/3Iychac 

Announcements