04-28-2021 04:46 PM
04-29-2021 08:03 PM
Greetings,
My printer has been losing its connection... to what exactly?
Remember, we are not there to see your environment and are relying on the information you provide to better understand and assist.
Each interface has a different MAC address that uniquely identifies it.
Your printer has 2 MACs.
One for the ethernet Interface, and one for the wireless interface
Its not uncommon for manufacturers to assign MAC addresses with subsequent digit or letters.
A wireless router is the same.
One MAC address is assigned to the WAN and one to the LAN. These can vary by one letter or digit as well.
Here is an example. My motherboard has 2 network adapters (eternet)
Description . . . . . . . . . . . : Intel(R) Ethernet Connection I217-V
Physical Address. . . . . . . . . : FC-XX-XX-XX-XX-60
Ethernet adapter Ethernet 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Killer e2200 Gigabit Ethernet Controller (NDIS 6.30)
Physical Address. . . . . . . . . : FC-XX-XX-XX-XX-61
They are the same except the last digit. These happen to be numeric. I don't think this is the reason for your issue.
~Rick
Bay Area - CA
~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
04-30-2021 01:21 PM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.