04-25-2018 12:32 AM
Hi,
I am attempting to connect an MP495 to a 5k iMac running macOS High Sierra version 10.13.5 Beta . Unforatuntely the Wifi printing is not working (although standard USB printing works fine).
I've done all the usual steps of first connecting via USB to ensure the printer is recognized. This of course works until I disconnect the cable and attempt to print via WIFI and the printer immediately displays as being offline. I have tried everything from removing and deleting, then reinstalling the printer in the Mac system preferences window, but that hasn't fixed the Wifi printing issue.
Since I'm on a newer iMac, I don't have a CD drive to attempt to install proprietary driver software from Canon and when I went to the web site to download it, it said it wasn't availble (possiby because I'm running a Beta OS ??).
I'm curious if anyone has had similar problems with Wifi printing on MacOS (Beta).
Thanks
04-30-2018 12:14 PM
Hello.
Troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.