Canon Community Canon Community

New Contributor
Posts: 1
Registered: ‎03-18-2014

MG6120 Problem

I'm using my MG6120 printer wirelessly, and my computers can't talk to it. I ran MP495 and it failed at Page 14.  My computers are running Win 7 (64-bit) and I have a Linksys EA6200. I've had it for about 3 years with very little trouble What additional info do you need?

Super Contributor
Posts: 145
Registered: ‎01-09-2014

Re: MG6120 Problem

Hello Colonel_Jeff,

First, I would like to confirm that your printer and network are communicating properly.  To do so, follow the steps below:

1.  Turn the PIXMA MG6120 on.

 2.  Select Sthe Setup icon from the Home screen and press OK.

 3.  Select Device Settings and press OK.

 4.  Scroll down to LAN settings and press OK.

 5.  Select Confirm LAN Settings and press OK.

 6.  Select WLAN setting list and press OK.

Is the connection status "active" or "inactive"?  What is the signal strength?

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement