Canon Community Canon Community
 


Reply
Super Contributor
Posts: 188
Registered: ‎10-02-2014

Re: How do I set up the MX430 for wireless printing

Is this a Windows computer by chance? Sometimes automatic Windows updates knock the printer into an "offline" status.

Go to the Devices&Printers in the Control Panel. Right click on the name of your printer and select "See What's Printing." In the upper left hand corner you should see the word Printer- click that and look for an option thats says "Use printer offline"- make sure that isn't checked. If it is, uncheck it and try to print again. If it's not, you may want to reinstall the drivers.
New Contributor
Posts: 3
Registered: ‎07-27-2015

Re: How do I set up the MX430 for wireless printing

MerryMary,

 

Thanks sooo much. I reinstalled the driver and everything is working great. Appreciate all your input!

New Contributor
Posts: 2
Registered: ‎10-25-2015

Re: How do I set up the MX430 for wireless printing

HELP! I cannot enter my password. The * key plus anything produces gibberish!
New Contributor
Posts: 2
Registered: ‎10-25-2015

Re: How do I set up the MX430 for wireless printing

This is the most frustrating thing I have ever experienvced in 30 years of working with computers!
New Contributor
Posts: 1
Registered: ‎04-19-2016

Re: How do I set up the MX430 for wireless printing

I would like to express my appreciation for these precise instructions. These instructions resolved my problem.

Thank you.
New Contributor
Posts: 1
Registered: ‎11-19-2016

Re: How do I set up the MX430 for wireless printing

I'm trying to set up on ipadair2 it says no air printer found

New Contributor
Posts: 2
Registered: ‎12-16-2016

Re: How do I set up the MX430 for wireless printing

I believe I have everything set up to receive email message, how ever it shows not connected and keep on showing trying to connect

New Contributor
Posts: 1
Registered: ‎01-23-2017

Re: How do I set up the MX430 for wireless printing

My wireless password contains letters, upper and lower. How do I enter letters and change casing when I'm entering my password during setup?

Product Expert
Posts: 1,773
Registered: ‎07-28-2014

Re: How do I set up the MX430 for wireless printing

Hi guerryclegg,

 

At first, your PIXMA MX430 will assume that you are entering in lower case letters.  To toggle between lower case letters, upper case letters and numbers, press the Tone (*)  key.  Each time the key is pressed, the printer will display a different character to the right of Enter passphrase.

 

If a mistake has been made, press the Left arrow to move the cursor underneath the character to be deleted.  Then, press the Back button to delete the character.  Enter in the correct character as needed.  Press the Right arrow to move the cursor to the end of the passphrase.  Continue entering in the passphrase.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
New Contributor
Posts: 1
Registered: ‎04-21-2017

Re: How do I set up the MX430 for wireless printing

I tried the link you gave on setting up the wireless:   https://www.usa.canon.com/CUSA/assets/app/pdf/wireless/setup_MX432_Win.pdf

and the Page was not Found. Do you have an updated link?

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement