Canon Community Canon Community

Honored Contributor
Posts: 5,516
Registered: ‎06-25-2014

Re: Best flash for a 6D

@ebiggs1 wrote:

"I'll use it for portraits and occasional weddings."


I have not used a flash for a wedding for as long as I can remember. ...

So don't keep us in suspense, Ernie: what do you use? Some form of studio light? I've never attended a wedding that didn't require supplementary light, and it's hard to believe that wedding venues are all that different in your part of the world.


Or are you referring to just the ceremony (where it can be difficult to get permission) and not the reception?

Philadelphia, Pennsylvania USA
Posts: 12,868
Registered: ‎12-07-2012

Re: Best flash for a 6D

"...are you referring to just the ceremony (where it can be difficult to get permission) and not the reception?"


I consider a wedding to be the ceremony.  The reception is a 'party' so to speak.  In 40+ years I have meet every conceivable type of priest or preacher or rabbi or reverend possible.  Some say you can do whatever you want.  Some say if I can tell you are here, I will throw you out. That is usually a priest.  Obviously a flash is impossible.  Some are somewhere in between.


For the reception all kinds of light is possible.  If I can avoid a flash I make every possible adjustment to do so.

EOS 1DX and 1D Mk IV and several lenses!
Esteemed Contributor
Posts: 3,845
Registered: ‎06-11-2013

Re: Best flash for a 6D

In all my years doing weddings, generally the officiant (priest/minister/rabbi/etc.) says no photography during the "ceremony" but they're fine with it both before & after the official ceremony.


I use flash outside during the day for fill-in of dark shadows and to balance back-lit shots.


Certainly also at the reception (most tend to be indoors at a hall/club/etc.) 


If you just use flash as a key light, then you get that bright subject, nearly black background (no ambience) and rapid light "fall off".  


I use Av mode and set the camera to to use auto-shutter speed with the restriction that it must be within the 1/60th to (whatever the flash-sync speed is... 1/200th, 1/250th, etc.)  This results in the camera metering for ambient light but supplementing with flash and you get a much more balanced result.  (BTW, this is not the default mode for the flash... you have to go into the camera menu to enable this behavior.  But I find it produces a much better result.)




Tim Campbell
5D III, 5D IV, 60Da
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement