cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

600EXII-RT flash

manosm
Apprentice

Hello to AllProblem with the Manual/Auto Zoom in my 600EXII-RT flash. I cannot change the M mode to Auto.When I press the Zm/CFn button all the times I have WIDE PANEL and the mm are 14 even with my 24-70 lens.

Any ideas how I can reset/correct this problem?

Thank you

1 ACCEPTED SOLUTION

kvbarkley
VIP
VIP

There is a little switch in the back of the wide-panel holder that must activate to tell the camera the wide panel is not being used. Pull the wide panel out completely, and re-insert it a few times to try to get it to seat properly.

View solution in original post

1 REPLY 1

kvbarkley
VIP
VIP

There is a little switch in the back of the wide-panel holder that must activate to tell the camera the wide panel is not being used. Pull the wide panel out completely, and re-insert it a few times to try to get it to seat properly.

Announcements