cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Has anyone ever had their Canon flash overheat during heavy shooting? I am using lithium batteries.

tarasteffenfoto
Apprentice

While shooting a wedding and reception, everything needed flash. I use lithium batteries in my flash, but they overheat and I must change them out with fresh ones. Is there another kind of battery that works better or is this just a fact of life that I must be prepared for?

15 REPLIES 15

As I stated above, lithium batteries are good in places where you want them to last a long time under harsh conditions. For example, I put them in the outside temperature sensor for my home wireless thermostat system. Just don't ask them to put out a lot of current in short period of time, like say, a flash!


@kvbarkley wrote:

As I stated above, lithium batteries are good in places where you want them to last a long time under harsh conditions. For example, I put them in the outside temperature sensor for my home wireless thermostat system. Just don't ask them to put out a lot of current in short period of time, like say, a flash!


I don't think it's quite that simple. There are commonly used lithium battery packs that clip onto your belt that can be used to power a flash. They deliver power a lot faster than the four NiMH AA's in the flash unit itself, yet they don't get hot in normal use.

Bob
Philadelphia, Pennsylvania USA

lithium.jpg

 

I am talking about these. As I also said above, don't confuse *re-chargeable* Lithium's with non-rechargeable Lithium-Alkilines. The OP has not told us what he is using.


@RobertTheFat wrote:

@jrhoffman75 wrote:

Canon put out an advisory on the use of lithium batteries. 

 

 


I didn't even realize that they make lithium AA batteries. I'm pretty sure I've never seen one.


Well, all of this talk about batteries is making me nervous.  What about the B&H "Watson" batteries, which they claim are NiMH?  Are they any good, you think? 

--------------------------------------------------------
"The right mouse button is your friend."


@Waddizzle wrote:

@RobertTheFat wrote:

@jrhoffman75 wrote:

Canon put out an advisory on the use of lithium batteries. 

 

 


I didn't even realize that they make lithium AA batteries. I'm pretty sure I've never seen one.


Well, all of this talk about batteries is making me nervous.  What about the B&H "Watson" batteries, which they claim are NiMH?  Are they any good, you think? 


I've used B&H's previous NiMH house brand, whose name escapes me at the moment. They were marginally better than Radio Shack, but not nearly as good as Eneloops.

Bob
Philadelphia, Pennsylvania USA

amfoto1
Whiz

I agree that you should try using alkaline or NiMH batteries (rechargeable, if possible). The lithium you're using might be part of the problem.

 

But, even alkaline or NiMH will get warm or hot with heavy use.

 

I think most Canon flash have an automatic shut-down if the flash itself  overheats, after which it will need to cool down for a while before it will work again.

 

Depending upon which flash you're using, an external battery pack might help. 500EX and 600EX series have a socket that allow them to be used with Canon CP-E4, CP-E3, etc. "compact battery packs". Those hold six or eight additional batteries, in addition to the four that are in the camera. Having all the extra batteries give a lot more shots, of course... but also seem less prone to heat up.However, even the CP-Ex battery packs will get quite warm with extended use.

 

There are third party external, rechargeable batteries, too. Many of those come with assorted power connectors, including a plug like that used by the 500EX and 600EX series flashes. Some of those might be usable with 400EX and 300EX series flashes, too... Although with all those that I've seen you have to modify the flash to be able to connect the battery pack (It connects via sort of a "dummy battery" that fits into the flash's battery compartment... but you have to cut a hole in the battery cover for the power cord to pass through).

 

***********


Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7DII (x2), 7D(x2) some other cameras, various lenses & accessories
FLICKR & EXPOSUREMANAGER 

Announcements
03/28/2023: New firmware version 1.0.3.1 is available for EOS-R5 C
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.