03-23-2020 10:16 PM
Hi there! I have a Canon 580EX II and a Canon 430EX III-RT and I'm trying to link them through a YN-E3-RT II and even after following all the steps I managed to get the 430 linked to the transmitter but not the 580. Can I link two different flashes via a transmitter?
03-23-2020 11:13 PM
Are you trying to link them via RF? The 580EX II does not have RF capability, wireless optical only.
04-08-2020 07:05 PM
yes its optcal only to link both and the 580 must be the master or if you have a 00d series not shure about rebles. you can
opticly link the pop up flash as a master use both as optical slave units.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.