01-22-2018 10:40 PM
Trying to use this app to control an SX530hs that is mounted above a photo table. Camera is in Manual and when used on it's own, photos look fine...just not practical to hang myself from the ceiling to run the camera. When I try using the camera connect app, I have no access to the camera settings through the app (I see the option, just not available) and my white table can be either white or dull beige depending on the color of the item on the table. I'm guessing the app defaults to a different program mode, but I'm at a loss as to how I can control that...if at all.
Any help would be appreciated,
Bob
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.