10-31-2019 06:08 PM
When printing to the manual feed on the back of the Canon Pro-1000, you have to walk over to the printer after you've printed and press "OK" to activate the print job. Is there a way to disable the printer asking me to press Ok to the print job? When I send a job to the printer I don't want to walk across the room or from another room and answer a question on the LCD screen, I want it to just start printing. Is there a setting somewhere for this?
Solved! Go to Solution.
10-31-2019 07:35 PM
On the Pro-100 with a Windows computer there is a screen prompt to allow printing to start. On macOS that prompt doesn't appear.
10-31-2019 07:35 PM
On the Pro-100 with a Windows computer there is a screen prompt to allow printing to start. On macOS that prompt doesn't appear.
10-31-2019 07:49 PM
Well, John, that was not the answer I wanted. I guess I'm stuck with all my Macs.
Thanks for that answer. That was very helpful.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.