01-31-2023 05:07 PM - last edited on 02-02-2023 09:34 AM by Danny
Prograf 1000 printer leaves some thin white horizontal lines near top of print. I am printing on Moab Juniper 5x7. I have cleaned the platen, the rollers, auto aligned the print head, switched to unidirectional printing but the lines persist. The tanks have ink.
02-06-2023 12:45 PM
Hi,
Based on the steps you have already taken, I recommend reaching out to Canon support for further troubleshooting in real time. You will need to register your Canon gear HERE to access additional support options.
We look forward to hearing from you.
02-06-2023 01:10 PM
Thanks for your suggestion. I have reached out, was told it is probably a hardware problem and since the printer is out of warranty I am on my own finding a generic inkjet repair facility in my area. I live in northern rural New Hampshire and have found none generic or close.
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.