cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pro 1000 small band

maucamo
Enthusiast
Nozzle perfect, head aligned, tried unidirectional and non unidirectional, tried avoid abrasion off and on, custom icc, tiff 16 bit, Lightroom.
This is not a banding, I think. That's happen from 3 cm. to 6 cm from the upper right part (at the end of the print), then lines disappears and all print is perfect. That happen only on glossy paper (with gsm 300). Printer is connected via lan. Printer driver ok.
What can I try?
IMG_1006.jpgIMG_1007.jpg
2 REPLIES 2

Patrick
Product Expert
Product Expert

Hi maucamo,

 

What version of Windows is installed on your computer?

 

If you are using a Mac, what version of OSX is installed?

 

Are you using your PRO-1000 wirelessly?   Or with a USB cable?

 

Who is the manufacturer of the paper that you are using and what specific type is it?

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Mac osx 10.15.7 connected via lan (tried also usb) paper is Canon pro platinium and Ilford Galleri smooth pearl. They are resin coated about 310 gsm lustre A3 format

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.