05-08-2014 02:09 PM
Is there anything to prevent the printer from using roll paper for prints 13" x greater than 19"?
05-08-2014 03:14 PM
Thanks for posting!
So that the Community can help you better, we will need to know Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x), as well as the way you connect to your PIXMA Pro-100 (USB or networked via WiFi or Ethernet).
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks and have a great day!
05-08-2014 04:35 PM
05-09-2014 09:15 AM
The on-screen manual states:
You can print on non-standard size paper within the following ranges.
- Minimum size: 3.50 x 5.00 inches (89.0 x 127.0 mm)
- Maximum size: 12.95 x 26.61 inches (329.0 x 676.0 mm)
manual feed tray
- Minimum size: 8.00 x 10.00 inches (203.2 x 254.0 mm)
- Maximum size: 14.00 x 23.00 inches (355.6 x 584.2 mm)
05-09-2014 10:07 AM
07-04-2015 11:17 AM
Just measured my PRO-100 manual feed and indeed, it expands to 14 inches, not 13.
Good luck, however, buying pre-cut paper in that size!
05-09-2014 05:12 PM
I found the source in the on screen manual, a bit buried actually. Also double-checked the specs on Canon's web site where it states the maximum paper size is 13x19.
06-11-2014 08:59 AM - last edited on 01-04-2020 02:25 PM by Danny
The printer is not designed to feed roll paper, however, it can feed paper sizes larger than 13" x 19" in the manual feed tray of the printer. For more information on the paper sizes and types that can be used with the PIXMA PRO-100, please click on the link below:
PIXMA PRO-100 Paper Size and Type Recommendations
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
02-26-2018 05:04 PM
According to a few youtube video you can go up to 14 by 26. But not with both feeders, and you cannot print to the edge, likley not more 13.5 wide (maybe only 13"). You have to setup a custom paper size and not print without margins. I thinkt he reason canon does not state this is because who sells 14 by 26 paper (not canon), and it has limiations like feeding one sheet at a time and not printing without borders.
01-04-2020 02:16 PM
So is this true -up to 26" by manual feed?
What paper sources are avaialble? I use Moab Baryta, but I doubt it comes in that size.
I have some very wide panorama images that would be exllent at or around that size.
Got link to the video?
Has anyone here printed that size? Any larger?
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.