10-28-2015 11:39 AM
I use the Pixma Pro 100 and am trying to print a black and white photo using Ilford Gold Fibre Mono paper 310gsm. I have tried printing on both trays (to no avail) and the printer appears to 'lose the grip' of the paper on the last inch of printing, where the paper then does a clear slide to the side and continues to print but makiing an unusual image that is mostly good but shifted on the bottom.
Is there any hope. I have used 310 thickness paper (i.e. MOAB Lasal Exhibition) with no problems.
10-28-2015 01:35 PM
It would seem that problems exist, exclusively with this type of paper. It might not meet specifications.
10-28-2015 04:17 PM
I have used that paper successfully in my Pro-100. Are you using the settings recommended by Ilford?
Maybe be you need a roller cleaning?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.