Canon Community Canon Community
 


Reply
New Contributor
Posts: 3
Registered: ‎03-01-2021

Re: Canon professional print and layout will not send to print

I finally got through to the support folks!  Had to block my calendar to allow time for it, but success!  Didn't even have to listen to the music for very long.  Smiley Wink

 

So PPL is once again working, after finding the correct IP for the printer, which was somehow different than when I originally installed the software.  I may never know what happened, but at least now I know how to correct the problem.

New Contributor
Posts: 1
Registered: ‎06-19-2021

Re: Canon professional print and layout will not send to print

I have used this software for a while and I know its pitfalls. I have a printer registered, I send the image, It says sending then just disappears. It was working fine last week, I've tried printing the same image that printed fine last week just to make sure there were no file errors. I've tried to install/reinstall. Switch on/off. Manually entered Ip4. Nothing. I've found my IP in settings, but the printer is altering one number and I can't correct just the IP. so frustrating as I know the solution but I can't fix it. Mac using Big Sur and have the current PPL. 

New Contributor
Posts: 1
Registered: ‎07-30-2021

Re: Canon professional print and layout will not send to print

Would you mind sharing what process they advised you in order to fix this?

Product Expert
Posts: 529
Registered: ‎11-21-2018

Re: Canon professional print and layout will not send to print

Hello Whitehouse,

 

We would be happy to assist with the issue. To provide some feedback or some troubleshooting steps, we would need some additional information. If you could reply to this message with the information below, we can provide some assistance.

 

  1. Which Canon printer are you using?
  2. Did this begin after any OS updates?
  3. WHat happens when you enter the unaltered ip address?

For a more immediate resolution to your issue, you can contact our phone support team at 1-800-652-2666. Our agents would be happy to help.

 

New Contributor
Posts: 1
Registered: ‎09-17-2021

Re: Canon professional print and layout will not send to print

I'm on a Win 10 with Canon Pro-300 using wired connection.  I had to add my printer back in to Professional Print and Layout by going to Stored Settings (on the right), then Printer, then Add Printer and search and used an IP address instead of the Mac address.  Then it worked fine for me.  It sure seems like the error message could be more useful like "Can't find the printer" or something.  I hope this helps someone.

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement