10-18-2022 09:45 AM - last edited on 10-28-2022 11:14 AM by Danny
Just got a new laptop and installed driver Generic Plus UFR II for C255iF. I am not seeing the option of all 4 drawers when I try to print something. I have Auto, Multi-purpose Tray and Drawer 1. How do I get drawers 2,3 & 4 to show if I want to choose one of them to print to?
Solved! Go to Solution.
10-18-2022 09:53 AM
Just found it. Go to Printer Properties, Device Settings, go down to Paper Source Settings and choose 3-cassette Feeding Unit. and hit apply.
10-18-2022 09:53 AM
Just found it. Go to Printer Properties, Device Settings, go down to Paper Source Settings and choose 3-cassette Feeding Unit. and hit apply.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.