01-06-2023 06:51 PM - last edited on 01-07-2023 10:07 AM by Danny
Hello, I am extremely frustrated, and a bit at a crossroads. I have a OCE Colorwave 900 that is no longer supported with a local tech anywhere on the East Coast of the US.
I am running into two error codes on the machine:
22550
/printer
AND
22575
/EmbeddedControl/SN_MediaInput - NodeConnection/Timeout
The print head seems to not be responsive at all at this point, and there is zero tech support through Canon directly, or a local tech to come out and service this. Any help is much appreciate. Thank you.
01-07-2023 10:06 AM
Hi, Recreashawn!
Thanks for posting! While our forum community members are welcome to chime in, Canon does not provide direct support for Océ series products. Your dealer will be able to help you, instead. If you don't have a dealer and you're in the United States, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to match you up with someone who may be able to help.
If you're outside the USA, visit http://global.canon and choose your country or region from the map for local support.
We hope this helps!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.