07-04-2014 12:39 AM
I can seem to find anyplace that will allow me to set my canon to default to grayscale, nor to set it for one document. I see that grayscale is set to off, but cannot determine how to change this setting from the imac nor the printer.
Help! I'm wasting a lot of ink.
Thanks
07-28-2014 01:36 PM
Hi shannon_sd,
To set your PIXMA MX922 to print in grayscale, please view this page from the manual:
http://ugp01.c-ij.com/ij/webmanual/PrinterDriver/M/MX920%20series/1.0/EN/PPG/Dg-quality.html
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.