03-27-2015 02:38 PM
Pixma MX882 When printing from computer or copying it prints two lines perfect, then the third line is not clear. Can see letters are fuzzy (not clear, but can tell it tried to print) Please help with any suggestions for correcting this problem. I have changed out the ink carts and run maintenance program. Thanks. Ross
03-31-2015 01:29 AM
Hi rossfwalker,
We recommend performing an automatic and manual print head alignment on the printer to see if this will resolve the issue. To do this, please follow the steps located here. Should you still experience difficulty, the printer will require servicing; please call or email us using one of the methods on the Contact Us page for further assistance.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.