09-22-2019 05:24 PM
printer see good level of ink in all cartridge, when i do test page not print the part that must be i magenta, cyano and yellow are printed very good and black the same.
09-26-2019 03:30 PM
Hi UBOOT571,
Please perform 2 printhead cleanings:
1. Press the <Maintenance> button twice until [H] appears.
2. Press the Black or Color button. The cleaning will begin.
After performing two cleanings, please print a nozzle check:
1. Press the <Maintenance> button once to display [A].
2. Press the Black or Color button.
Does your printout look like the example below:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.