01-21-2014 12:15 PM
Hello,
I am printing large images on my canon ipf 9100 and until today since a year i realized that the prints are actually smaller by almost a quarter of an inch that the real size.
I tried from photoshop, from windows, from mac, from ergosoft rip it is always the same.
the width is always correct the height is less , the longer the printer the higher the difference.
Firmware is updated driver is updated.I tried the lenght test from the menu and i measure it is not the same so i tried to increase a bit but still the size is always different.
Appreciate your help pleaseee
10-14-2014 04:41 AM
10-14-2014 05:18 AM
Yes me too most of the time on long formats!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.