05-25-2016 12:25 AM
MG7120, Error 1312. Have followed manual on troubleshooting tips and videos. DOublechecked all accessible areas there is no visible paper inside. Thinking that the last paper through it (index cards) triggered something and it still senses "paper".
Any ideas?
05-27-2016 01:40 PM
Hello.
Troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
05-27-2016 01:45 PM
thanks - found the issue, it was an index card still stuck inside that wasn't visible. Was able to slide a 8x11 piece of cardstock via rear door and turn it on. Printer sensed a larger piece of paper and rolled it out during startup, thus dislodging the index card.
Printer works fine now.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.