01-09-2021 11:41 PM
Hello. I have done everything thing possible ( running all the maintence options on the printer to cleaning the print head to all the options on youtube ) to try to fix this problem. When I print something in color, there is always white lines between the picture. When I print in black and white, there is no lines. Please see attached. Any suggestions on how to fix this problem would be greatly appreciated. Cannon MP530 printer.
01-10-2021 09:48 AM
Canon Knowledge Base - Printing the Nozzle Check Pattern MP530
Did you try deep cleaning?
01-10-2021 10:14 AM
Yes. As I have stated, I've used all the options available on the printer. Head Cleaning, Deep Cleaning, Align Heads, etc. I've manualy cleaned the print head ( shown on youtube as a solution ), replaced all the ink cartridges, cleaned the clean plastic strip inside the printer ( shown on youtube ) and nothing has fixed the problem.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.