07-09-2020 11:16 AM
No response to the power button. Kept it pressed down: nothing. Unplugged it and left it for 10 minutes: nothing. Changed the power cord: nothing.
Any ideas? It was fine yesterday.
The **bleep** thing is only 2 months old.
07-10-2020 06:16 PM
Hi timauger.
If the power button is not working correctly, then the printer will need to be serviced or replaced. You may find your local branch of Canon through the map at https://global.canon/en/support
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.