07-10-2021 06:49 PM
There seems to be an error of some kind in the vertical position of anything I try to print. The upper or top edge is always wrong. A 7"by5" landscape will be off by about 3/16". A 6" by 4" photo placed on a 7"x5" print will be about that same difference off. I know that there is a horizontal correction possible, but I see no way to correct the vertical setup. Any help would be appreciated. I have gone through a lot of paper and ink trying to sort this out.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.