01-26-2017 12:53 AM
Solved! Go to Solution.
01-26-2017 10:38 AM
Hello.
When the printer is powering on, a brief cleaning cycle will be performed. Since the printer is used a few times daily, it would be fine to keep the printer powered on and reduce the amount of cleaning cycles that are performed.
We cannot recommend the use of third party or remanufactured ink tanks. They may cause print quality issues or lead to other errors.
This didn't answer your question or issue? Find more help at Contact Us.
01-26-2017 10:38 AM
Hello.
When the printer is powering on, a brief cleaning cycle will be performed. Since the printer is used a few times daily, it would be fine to keep the printer powered on and reduce the amount of cleaning cycles that are performed.
We cannot recommend the use of third party or remanufactured ink tanks. They may cause print quality issues or lead to other errors.
This didn't answer your question or issue? Find more help at Contact Us.
05-14-2017 07:10 PM
05-14-2017 04:59 PM
Hi everybody,
I am trying to hook up my new printer and don't even get past the "on" button! The message says to remove all tape (or whatever) which I have done completely. The only button lit is "copy"
HELP.
Debra
05-14-2017 07:11 PM
05-14-2017 09:17 PM
Thank you!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.