04-29-2021 11:25 AM
I have had exactly the same problem for a month or two now, it's not overlayaed all down the page, some time the print is normal, but the next line or two are overlayed. I have done all the maintenance proceedures, all ok. I've had the print head out, and given it a thorough clean, new ink, reinstalled the software from the Canon site. The results are as below, NO Change. Can anybody help? I'm at my wits end. If I can't find a solution, this canon's going in the bin!
05-02-2021 04:12 AM
i have with my mg5750 exacty the same problem.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.