10-03-2019 01:36 PM
This is hard to describe, bear with me.
I print many shipping labels a day using 8 1/2 x 11 with 2 labels each.
Until a few days ago when I wanted to print just one label, the printer would feed
the paper through and start the printing on the leading upper edge I'd fed into the paper slot.
That has changed now though and I do not know why. Now, the paper feed advances the paper
and starts to print on the 2nd label. It is driving me crazy!
I haven't changed any print settings at all.
Would the safest bet be to just do a factory reset?
Thanks, KittyAnn
10-03-2019 04:42 PM
Hello.
Does this issue only happen when you print labels? If you were to print a document on plain paper, do the same issues occur?
10-10-2019 06:24 PM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.