07-25-2020 03:50 PM
So I cleaned printer, put in some new cartridges, printed test pages, and wiped the timing strip clean several times. But it is still printingn in double vision format meaning for example, a single letter P looks like two P's very close together, like someone without glasses is seeind double everything without their lenses on.
It is a Canon Pixma MG6320 printer that is old and out of date and I do not have warranty on it to get it fixed or serviced. I purchased this printer years ago.
Solved! Go to Solution.
07-31-2020 04:23 PM
Hi MelRW1012.
Try gently cleaning the printer's timing strip. If the problem persists, then the printer will need to be replaced; warranty options are available through the resources in your Canon account .
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
07-31-2020 04:23 PM
Hi MelRW1012.
Try gently cleaning the printer's timing strip. If the problem persists, then the printer will need to be replaced; warranty options are available through the resources in your Canon account .
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.