09-11-2017 12:47 PM
Hey,
My printer has crapped out over the previous 5 or 6 print attempts.
It has plenty of ink.
The image was poor and poorly registered. Now the image is barely a shadow of the file to be printed.
The printer is about 4 years old. I diid all the obvious maintainence steps: Head cleaning, roller cleaning, etc.
Is this thing dead?
Thanks,
Rog
09-11-2017 01:21 PM
Hi rfsmith48,
It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.