Canon Community Canon Community

New Contributor
Posts: 4
Registered: ‎11-20-2017

Pixma-TS9120 won't let me print pages from standard paper tray

I had a page that I wanted to print and selected print.  All settings showed correctly.   After a moment I got the message no paper in tray.   I checked and plenty of paper.  Selected print again and same result; however, I was by the printer and saw that it was trying to print from rear feed for photos.    I double checked settings and everything was marked to feed from main tray. Tried again with same result.   I then selected a pages template and printed with the same result.  I then put a standard piece of 8-1/2 x 11 paper in the rear feed and selected print.  It printed just fine, HOWEVER NOT from rear feed, but main tray.   Did this 3 times with good result.  I then removed the paper from the rear feed and tried again with the "paper out" message.   


Now for the strange part.   I print a spreadsheet and it prints from main tray with no message.


How do I fix this?   I am running out of ideas and very frustrated.    One last note there was a paper jam in rear, which I cleard.  

Product Expert
Posts: 479
Registered: ‎11-21-2018

Re: Pixma-TS9120 won't let me print pages from standard paper tray



The computer and program that you are printing from will determine the tray that is used. To assist further we would need some additional information. If you could reply to this message with the information below, we will be able to provide trouble shooting steps.


  1. What version of the Mac or Windows operating system are you using on your computer?
  2. What program are you printing from?
  3. What size and type of paper is selected in your print window?
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement